Eberspacher EasyStart PRO
The new Eberspacher EasyStart PRO timer is a 7 day combination timer with automatic altitude adjustment and diagnostic troubleshooting functions.
• Genuine Eberspacher EasyStart PRO, 7 day combination timer.
• OBD on board diagnostic readouts and automatic altitude adjustment.
• Suitable for both 12 volt or 24 volt installations
• Surface Mountable for ease of installation
• Comfortable room temperature control
• Long-press function for immediate heating
• An external sensor fitted within the timber
Very compact dimensions:
Width - 82 mm, Height - 37 mm, Depth - 13mm
EasyStart Timer Contents:
• Mounting bracket, adhesive mounting pad, electrical connector Housings & terminals
• Installation, wiring diagram & operating instruction manuals (supplied on disc).
This is a genuine Eberspacher warranted product 12 months - In the unlikely event of a fault arising due to manufacturer defective parts or workmanship please just return the Easy Start Call to Mellor Online or Eberspacher.
If external remote temperature sensing is required other than the one in the timer, please use specific Easystart temp sensor 22.1000.35.2100, may need programming.
Please Note: This controller is ONLY for use with the following heaters;
• Eberspacher Airtronic S2 (D2L)
• Eberspacher Airtronic M2 (D4L)
• Eberspacher Hydronic S3
This controller IS NOT backward compatible with previous versions of the Eberspacher Airtronic D2 D4 D4S D5 or the Hydronic D4W D5W series heaters.
If you are unsure whether this controller will work with your heater, please contact us via our website with your heater model number.